How to recycle copper from waste wires

Waste wires are very common in our daily life. A large amount of waste wires are generated every year. Because waste wires contain copper wires, there are usually special people to recycle waste wires and recycle the copper inside.

The method of recycling copper in waste wires is usually physical crushing and then sorting. On the one hand, this method has high sales efficiency, and because it is equipped with dust removal equipment, it will not pollute the environment. Compared with traditional methods such as fire method and manual wire stripping, the advantages are very obvious.

The specific process is as follows:

1. After the cable recycling machine is installed and debugged, during normal production operation, the equipment needs to run empty for 2-3 minutes, and it can be put into operation after everything is normal.

2. Send the waste wires into the crushing host to crush the materials for the next step of sorting.

3. After the crusher crushes the raw materials, the crushed raw materials flow into the conveyor from the lower discharge port.

4. The conveyor brings the raw materials into the vibrating screen, and the vibrating screen begins to classify the raw materials, with plastic skin particles on one side and copper particles on the other side

5. The plastic particles on the screen will contain a small amount of unscreened plastic particles and a small amount of copper wire. The finished particles are near the two outlets. The unscreened plastic particles containing a small amount of copper powder enter the high-voltage electrostatic separator, and finally the copper foam in the plastic is sorted out.

Operation precautions:

1. Site: The copper rice machine should be installed on a flat ground. If the ground is not flat, it will cause the equipment to vibrate.

2. Check whether there are any problems with the various parts of the equipment, open the upper shell of the crusher, and turn the crusher blade by hand to see if the rotation is smooth and whether there are any scratches on the bottom screen

3. Connect the power supply to the distribution cabinet, and then thoroughly check whether there are any problems with the equipment, such as loose bolts.

4. After turning on the power, turn on and off the power switches of each device one by one, and observe whether there are any problems with the wire direction.

5. Check the equipment, investigate the supplier of the wire crushing equipment based on the above situation, and determine the work plan and equipment configuration.

6. It is recommended that the equipment run without load for half an hour before the first production. This way, we can observe whether there are any problems with the equipment operation so that adjustments can be made.

The copper rice crushed by the waste wire recycling machine can generally be sold directly. Copper is a non-renewable resource and has a relatively large utilization value. The cable recycling machine is undoubtedly one of the effective ways to recycle waste wires. If you have relevant needs, please feel free to contact us.